15tbYou have accessed an invalid hardware address 0X1801B00C ?hello world! 528502 w8ai0t waiA[HDMI]: Set I2C Speed = 100 kHz [HDMI]: Chk_HotPlug() TV is not connected. [HDMI]: Read_EDID abort, HDMI cable plug off. [HDMI]: TV is not connected. PAL logo REALTEK ROM Monitor, Revision 0000.0202.1026L. Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time /version= Jun 23 2010 20:34:19 /0000.0202.1026L MAC address = 00.ce.39.60.17.9a Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x93 / 0x78 Endianness = Little Flash memory size = 128 MByte SDRAM size = 128 MByte First free SDRAM address = 0x800fa700 Press 'ESC' to Monitor mode ____________________Linux Kernel: FW Image from 0xa2020000, to 0x80100000, size=0x40a086 Audio FW: FW Image from 0xa2440000, to 0x81b00000, size=0x1d3058 Video FW: FW Image from 0xa2620000, to 0x81d80000, size=0x232670 5280Go 5280Go Bgooa r0x8d0Bo100n00di0n mg td 0pax0rts00=r00tk00_n2 an d:35712k,80512k(/),8192k(/usr/local/etc),6656k rootfstype=yaffs2 root=31:01 Reset Ethernet Mac. Address = 0x80100000 Realtek LINUX (DC ALIAS) started... Venus setting: ROSs have 2621440 bytes RAM. System CPU has 2 UARTs. System CPU uses external timer interrupt. Bootloader version: 0000.0202.1026L. This version string is of new format. The information of this board: Company ID:0x0 CPU ID: 0x12 Board ID: 0x202 Ethernet Mac address: 00.CE.39.60.17.9A Model Config length=10 Base year of RTC is 2010. Config serial console: console=ttyS0,115200n8r prom_flashsize = 0x08000000 Linux version 2.6.12.6-VENUS (zpl1025@meledev) (gcc version 3.4.4 mipssde-6.03.00-20051020) #35 Thu Sep 30 14:23:27 CST 2010 audio addr: 1b00000 CPU revision is: 00019378 Determined physical RAM map: memory: 00100000 @ 00000000 (usable) memory: 00428000 @ 00100000 (reserved) memory: 015d8000 @ 00528000 (usable) memory: 00500000 @ 01b00000 (reserved) memory: 06000000 @ 02000000 (usable) show info: max_low_pfn:32768 show info: min_low_pfn:1320 Built 1 zonelists Kernel command line: mtdparts=rtk_nand:35712k,80512k(/),8192k(/usr/local/etc),6656k rootfstype=yaffs2 root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0::: Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled PID hash table entries: 256 (order: 8, 4096 bytes) Estimate value: CPU frequency 405.01 MHz Using 27.000 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 119552k/121696k available (3415k kernel code, 2112k reserved, 577k data, 144k init, 0k highmem) Warning! Unknown board id. ==================== Warning! The calculated loops_per_jiffy is not similar to the default one. ==================== Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. ========== board id: 202 ========== [INFO] neptune mode... boot_param value: a0002800 mode: 1 size: 1712 color1: 0x808010 color2: 0x8080eb color3: 0xb7458a color4: 0x3bb66f NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub se init module major number = 254 size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52... [user land] CmdBuf virt addr = 80660000/a0660000, phy addr=00660000 Hello, Realtek TLB Mapper AllocBP size: 294912 order: 7 <<>> 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 7: 0 8: 0 9: 0 10: 0 11: 0 12: 6 squashfs: version 3.1 (2006/08/19) Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. [Audio Firmware Version] 326686 [Binary src compiled at] Jul 23 2010 18:49:49 [A] gloabl malloc size 0x001fff90 YAFFS Driver Rev:292241 (2010-01-19) YAFFS Driver is successfully installing. Initializing Cryptographic API Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A ttyS1 at MMIO 0x0 (irq = 3) is a 16550A io scheduler noop registered RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize loop: loaded (max 8 devices) this MARS eth RX_OFFSET = 0x0 8139cplus: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) MAC address = 0x00.CE.39.60.17.9A eth0: RTL-8139C+ at 0xb8016000, 00:ce:39:60:17:9a, IRQ 2 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 VenusSFC MTD init serial flash inaccessible cp_hotplug physmap flash device: 8000000 at 17d00000 Realtek NAND Flash Driver Rev:305341 (2010-04-13) One HY27UF081G2A chip has 1 die(s) on board nand part=HY27UF081G2A, id=adf1801d, device_size=134217728, chip_size=134217728, num_chips=1, isLastPage=0 [NF_CKSEL] HY27UF081G2A is set to nf clock: 0x3 [rtk_nand_scan_bbt] have created bbt B0, just loads it !! [dump_BBT] Nand BBT Content [0] (0, 616, 0, 1023) [1] (0, 616, 0, 1022) [2] (0, 616, 0, 1021) [3] (0, 616, 0, 1020) [4] (0, 616, 0, 1019) [5] (0, 616, 0, 1018) [6] (0, 616, 0, 1017) [7] (0, 616, 0, 1016) [8] (0, 616, 0, 1015) [9] (0, 616, 0, 1014) [10] (0, 616, 0, 1013) [11] (0, 616, 0, 1012) [12] (0, 616, 0, 1011) [13] (0, 616, 0, 1010) [14] (0, 616, 0, 1009) [15] (0, 616, 0, 1008) [16] (0, 616, 0, 1007) [17] (0, 616, 0, 1006) [18] (0, 687, 0, 1005) [19] (0, 687, 0, 1004) [20] (0, 687, 0, 1003) [21] (0, 687, 0, 1002) [22] (0, 687, 0, 1001) [23] (0, 687, 0, 1000) [24] (0, 748, 0, 999) [25] (0, 748, 0, 998) [26] (0, 748, 0, 997) [27] (0, 748, 0, 996) [28] (0, 748, 0, 995) [29] (0, 748, 0, 994) [30] (0, 748, 0, 993) [31] (0, 748, 0, 992) [32] (0, 748, 0, 991) [33] (0, 748, 0, 990) 4 cmdlinepart partitions found on MTD device rtk_nand RTK: using dynamic nand partition Creating 4 MTD partitions on "rtk_nand": 0x00000000-0x022e0000 : "Partition_000" 0x022e0000-0x07180000 : "/" 0x07180000-0x07980000 : "/usr/local/etc" 0x07980000-0x08000000 : "Partition_003" 0x00000000-0x08000000 : "disc" Realtek Nand Flash Driver is successfully installing. Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice i2c /dev entries driver [I2C0] i2c speed changed to 100 KHz I2C0 Bus Status Check.... OK ========================= = VER : 2.0a ========================= = PHY : 0 = MODE: MARS = SPD : 100 = SAR : 0x024 (7 bits) = TX FIFO DEPTH : 8 = RX FIFO DEPTH : 8 = FIFO THRESHOLD: 4 = BUS JAM RECORVER : ON = NON STOP WRITE : ON = SP PROTECT : ON ========================= FATAL : I2C 1 pins have been occupied by PCI Trying to free free IRQ3 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp. cp_open alloc rings cp->rxdesc_buf =0xa19ad000 , cp->ring_dma=0x19ad000 init_hw init_hw finished RTK rtc can work. IP-Config: Complete: device=eth0, addr=192.168.0.9, mask=255.0.0.0, gw=192.168.0.254, host=192.168.0.9, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= yaffs: dev is 32505857 name is "mtdblock1" yaffs: Attempting MTD mount on 31.1, "mtdblock1" yaffs: restored from checkpoint VFS: Mounted root (yaffs2 filesystem) readonly. Mounted devfs on /dev Freeing prom memory: 0kb freed Reclaim bootloader memory from 80020000 to 80100000 Freeing unused kernel memory: 144k freed Welcome to Realtek Linux Please press Enter to activate this console. yaffs: dev is 32505858 name is "mtdblock2" yaffs: Attempting MTD mount on 31.2, "mtdblock2" yaffs: auto selecting yaffs2 yaffs: restored from checkpoint Starting INET services.... 120+0 records in 120+0 records out 61440 bytes (60.0KB) copied, 0.009444 seconds, 6.2MB/s @@@@load sata by default@@@@ libata version 1.12 loaded. Running dvdplayer with RootApp sata driver initial...2009/12/30 14:50 mars_init_sata(1255)dev_addr:c0062500 set corepath: /tmp/hdd/volumes/HDD1/ ata_device_add(4891)probe begin scsi0 : SATA_DRV Creating /tmp/ISS.. / # sata dma reset RootApp AVHDD version... enter 2nd case... ================================================ ================================================ root execute DvdPlayer... ================================================ ================================================ Mounting ISS.. Starting ISS.. IN : /tmp/ramfs/smb downloader 0 starts, 0x102ab010 downloader 1 starts, 0x102ad108 CMD: mkdir -p /tmp/netb/smb In my system... CMD: mkdir -p /tmp/smb In my system... CMD: ifconfig > /tmp/netb/samba_my_ip In my system... sata1: reset phy again! sata phy reset Warning!! the Mask is 255.0.0.0. simon521 file system 2, sector 4294966272 mount to /tmp/hdd/volumes/HDD1 file system 4, sector 262144 mount to na file system 3, sector 262144 mount to /tmp/hdd/root In my system... MELE_IRADIO_FILE_DIR:/tmp/hdd/root/irf DB FILENAME = /tmp/ramfs/Setup [DataObject.cpp 399]DB Develop Version same . Don't be upgrade. [DataObject.cpp 438]DB Version same . Don't be upgrade. m_BookMark_Size=4096 m_Signature_Size=16 GrandMa Revision: 315443 Version: v7.3.4 r4824 RC18 Time: Dec 02 21:32:16 2010 StandbyOpenDevice ok MeleStandby.c:208 cmd [STANDBY_CMD_SYSTEM_ON]:len=2 data= f0 fe MeleStandby.c:223 cmd sent ok MeleStandby.c:208 cmd [STANDBY_CMD_MUTE_OFF]:len=2 data= f9 fe MeleStandby.c:223 cmd sent ok MeleStandby.c:208 cmd [STANDBY_CMD_QUERY_POWERON_MODE]:len=2 data= f3 fe MeleStandby.c:223 cmd sent ok Error in threshold value: 0... WatchDog does not receive signal for 2 seconds, value: 0 sh: -: unknown operand select timeout! poweron mode: -1 (User ***128MB version... Input)Pipe Created. (Internal Event)Pipe Create Memory address 0x40000000 d. pli initialization... In my system... sata1: reset phy again! sata phy reset In my system... BOARD_RTD1073 ......... got: 1 main.cpp:CheckCustomerID:250 554 loadThemeSetting resource.cpp No THEMESET_INI exists open "/dev/cdrom0" failed Open device(/dev/cdrom0) failed try_to_free_pages: free 590 +++ ALLOC index: 20480 order: 12 1. start remap DVR zone 87000000(80609000) 4096... map_done is 0... try_to_free_pages: free 547 +++ ALLOC index: 16384 order: 10 1. start remap DVR zone 86000000(805e9000) 1024... map_done is 0... Error in threshold value: 0... WatchDog does not receive signal for 2 seconds, try_to_free_pages: free 767 value: 0 +++ ALLOC index: 18432 order: 11 1. start remap DVR zone 86800000(805f9000) 2048... map_done is 0... try_to_free_pages: free 561 +++ ALLOC index: 12288 order: 11 1. start remap DVR zone 85000000(805c9000) 2048... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 17408 order: 8 1. start remap DVR zone 86400000(805f1000) 256... map_done is 0... try_to_free_pages: free 31 +++ ALLOC index: 17664 order: 7 1. start remap DVR zone 86500000(805f3000) 128... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 17792 order: 7 1. start remap DVR zone 86580000(805f4000) 128... map_done is 0... --- FREE index: 20480 order: 12 --- FREE index: 16384 order: 10 --- FREE index: 18432 order: 11 --- FREE index: 12288 order: 11 --- FREE index: 17408 order: 8 --- FREE index: 17664 order: 7 --- FREE index: 17792 order: 7 try_to_free_pages: free 51 +++ ALLOC index: 16384 order: 8 1. start remap DVR zone 86000000(805e9000) 256... map_done is 0... start[0-3] = {7001a500, 7001a504, 7001a508, 7001a50c} end[0-3] = {7001a510, 7001a514, 7001a518, 7001a51c} SetLPrintBuffer: header address = 0x00000000 try_to_free_pages: free 216 +++ ALLOC index: 16896 order: 9 1. start remap DVR zone 86200000(805ed000) 512... map_done is 0... Video DebugMem PVIDEO_RPC_SetDebugMemory Called!hysical Address = 0xd1400 try_to_free_pages: free 65 +++ ALLOC index: 16640 order: 7 1. start remap DVR zone 86100000(805eb000) 128... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 17408 order: 8 1. start remap DVR zone 86400000(805f1000) 256... map_done is 0... [A] gloabl malloc size 0x001fff90 ptr 0x86200000 [A] gloabl malloc size 0x001fff90 ptr 0x86100000 [A] gloabl malloc size 0x001fff90 ptr 0x86400000 [A] gloabl ptr 0x00000001 0x862016b0 [A] gloabl ptr 0x00000002 0x86204360 [A] gloabl ptr 0x00000003 0x86209c10 [A] gloabl ptr 0x00000004 0x86213cb0 [A] gloabl ptr 0x00000005 0x86227d50 [A] gloabl ptr 0x00000006 0x8624fdf0 [A] gloabl ptr 0x00000007 0x8629fe90 [A] gloabl ptr 0x00000008 0x862dfed0 [A] gloabl ptr 0x00000009 0x8637ff20 CreateAudioAgent 0x00000007 ao create ------[AO] 0x8620b430-------- ------[AO1] 0xa620b430-------- ao finish create _VENUSAOUT_Init create ring 0x8620bc80 [AUDIO WARNING] no more memory , do Remote Malloc. Size 0x00186008 try_to_free_pages: free 0 +++ ALLOC index: 17920 order: 9 1. start remap DVR zone 86600000(805f5000) 512... map_done is 0... 0x00000001 0x00000001 0x00000000 0x00000000 0x00000001 0x00000001 0x00000005 0x00000005 0x00000000 0x00000000 0x00000001 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000 0x00000001 0x00000001 0x00000000 0x00000000 0x00000001 0x00000001 0x00000000 0x00000000 [SRC create 0xa620b430 0x8629fe98] ao_midware_var_init [ao_HDMI_Condition_Reset] [1.cs 0x00000000] [2.cs 0x00200000 0x0000bb80 0x0000bb80] [EDID 0x00000000 0x00000000 0x00000002] [HDMI 0x00000001 0x00000001 0x00000003 0x00000001] [PRE 0xfffffffd 0xfffffffd 0xfffffffd 0xfffffffd] New_HDMI_frquency = 0x00000000, Old_HDMI_frequency = 0x00000001, RPC_HDMI_freq[var->aout_upmix_dis] [var->aout_hdmi_downmix_dis] [var->aout_spdif_downmix_dis] [var->aout_i2s_downmix_dis 0x00000000 0x00000000 0x00000002] [var->C_to_LR_downmix_dis] [ao_hdmi_sync 0x00000000] [HDMI]: s_freq= 0x00000003 CTS=27000 N= 0x00001800 [Video Firmware Version] 325178 [Video Binary Built on] Jul 19 2010 17:18:53 try_to_free_pages: free 0 +++ ALLOC index: 12288 order: 12 1. start remap DVR zone 85000000(805c9000) 4096... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 18432 order: 10 1. start remap DVR zone 86800000(805f9000) 1024... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 16768 order: 3 1. start remap DV[ao_hdmi_out_select 0x00000000] _VENUSAOUT_Init end ------------------- Audio Version = 326686 Common Version = 320797 Build Date = Jul 23 2010 BRuild Time = 18:49:49 Note = ------------------- _VENUSAOUT_MainProcess zone 86180000(805ec000) 8... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 20480 order: 12 1. start remap DVR zone 87000000(80609000) 4096... map_done is 0... try_to_free_pages: free 0 +++ ALLOC index: 8192 order: 12 1. start remap DVR zone 84000000(805a9000) 4096... map_done is 0... VBM: configured to SD! AddPassThroughQueue = 0x79e72c35 0x000007a7 AddPassThroughQueue = 0x1efb00fb 0x00004315 ALMask = 0x00000002 0x8c00303d BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [BONDING] ac3_dts_ddp dec= 0x00000000 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [BONDING] ac3_dts_ddp dec= 0x00000000 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [BONDING] MLP ret= 0x00000000, key= 0x00000001, HBR= 0x00000000, dac= 0x00000000 [BONDING] MLP ret= 0xffffffff, key= 0x00000001, HBR= 0x00000000, dac= 0x00000001 gpAudio->AudioLicenseControlSubMask = 0x8c00303d!, if 0, no key is accepted board = 1 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (1,0,0) Do you have key?(0 = no!) 0 Bonding option process 0x00000009 to AUDIO_UNKNOWN_TYPE !!! BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [BONDING] ac3_dts_ddp dec= 0x00000000 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [BONDING] DTSHD ret= 0x00010000, getkey= 0x00000001, HBR = 0x00000000, dac= 0x00000000BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 gpAudio->AudioLicenseControlSubMask = 0x8c00303d!, if 0, no key is accepted board = 1 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) 0 Bonding option process 0x0000001b to AUDIO_UNKNOWN_TYPE !!! BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 gpAudio->AudioLicenseControlSubMask = 0x8c00303d!, if 0, no key is accepted board = 1 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) 0 Bonding option process 0x0000001c to AUDIO_UNKNOWN_TYPE !!! BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 gpAudio->AudioLicenseControlSubMask = 0x8c00303d!, if 0, no key is accepted board = 1 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,1,0) Do you have key?(0 = no!) 0 Bonding option process 0x0000001d to AUDIO_UNKNOWN_TYPE !!! BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 gpAudio->AudioLicenseControlSubMask = 0x8c00303d!, if 0, no key is accepted board = 1 !, if -1, this board has illegal ID file is (AC3,DTS,WMA) (0,0,1) Do you have key?(0 = no!) 0 Bonding option process 0x00000023 to AUDIO_UNKNOWN_TYPE !!! BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBsonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBoanding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBondinvg DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBondinge 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 BoardBonding 0x00000002 ClassifyBonding DD 0x00000002 [DEC check support type]>>>>>>>>>> 0x0000000003c1bdfe High = 0x00000000, Loew = 0x03c1bdfe The following Format is supported: MPEG AC3 LPCM DTS WMA AAC VORBIS DV DDP (AC3+, EAC3) DTS HD WMA Pro MP4 LC-AAC MP4 HE-AAC RxAW AAC ADPCM FLAC A Law PCM u Law PCM it: isCheckpointed 1 HighWord 0xffffffff, LowWord 0xffffffff Bit Mask = 1111111111111111111111111111111111111111111111111111111111111111 [VIDEO Capability]HighWord 0xffffffff, LowWord 0xffffffff [HDMI]: Set AVMute [HDMI]: TURN OFF HDMI PHY for Mars ARPC: Audio Config 0x00000004 ! ARPC: Audio Config 0x00000000 ! ARPC: Audio Config 0x00000001 ! ARPC: Audio Config 0x00000002 ! [1.spdif_mastership 0x00000101 0x00000001] [spdif_mastership 0x00000101 0x00000101] _AO_SPDIF_Source_Change [command 0x00000101 0x00000101] [var->aout_upmix_dis] [var->aout_hdmi_downmix_dis] [var->aout_spdif_downmix_dis] [var->aout_i2s_downmix_dis 0x00000000 0x00000000 0x00000002] [var->C_to_LR_downmix_dis] [IN CS Change 0x00000000 0x00000001 0x00000000 0x00000101] [ 0x00000101 0x00000000 0x00000001 0x00000000 0x00000000] [ao_hdmi_mute] [ao_hdmi_ctl 0x00000000 0x00000000] [AO] RPC mute [AO] RPC mute [ao_mute_hw] ARPC: Audio Config 0x0000001f ! ARPC: Audio Config 0x00000002 ! [1.spdif_mastership 0x00000101 0x00000000] [spdif_mastership 0x00000101 0x00000101] ARPC: Audio Config 0x00000003 ! ARPC: Audio Config 0x00000004 ! ARPC: Audio Config 0x00000020 ! ARPC: Audio Config 0x00000004 ! [var->aout_upmix_dis] [var->aout_hdmi_downmix_dis] [var->aout_spdif_downmix_dis] [var->aout_i2s_downmix_dis 0x00000000 0x00000000 0x00000002] [var->C_to_LR_downmix_dis] _AO_SPDIF_Source_Change [command 0x00000101 0x00000101] [var->aout_upmix_dis] [var->aout_hdmi_downmix_dis] [var->aout_spdif_downmix_dis] [var->aout_i2s_downmix_dis 0x00000000t 0x00000000 0x00000002] [var->C_to_LR_downmix_dis] [IN CS Change 0x00000001 0x00000001 0x00000000 0x00000101] [ 0x00000101 0x00000001 0x00000001 r0x00000000 0x00000000] [ao_hdmi_mute] [ao_hdmi_ctl 0x00000000 0x00000000] [AO] RPC mute [AO] RPC mute [ao_mute_hw] y_to_free_pages: free 252 +++ ALLOC index: 4096 order: 11 1. start remap DVR zone 83000000(80589000) 2048... map_done is 69... [!!!!~~ 0x00000002 0x00000000~~!!!!] [EDID 0x00000000 0x00000000 0x00000002] [HDMI 0x00000001 0x00000001 0x00000003 0x00000001] [PRE 0x00000001 0x00000003 0x00000001 0x00000003] New_HDMI_frquency = 0x00000000, Old_HDMI_frequency = 0x00000000, RPC_HDMI_freq[ao_hdmi_sync 0x00000000] [HDMI]: s_freq= 0x00000003 CTS=27000 N= 0x00001800~~SetVideoStandard 7 1 Error in threshold value: 0... WatchDog does not receive signal for 2 seconds, value: 0 IN : /tmp/ramfs/usb/livepause IN : /tmp/ramfs/usb OUT : /tmp/ramfs/usb/livepauWARNING[2]:TVE i-underflow @ line 0 se IN : /tmp/ramfs/usb/rec currentAp:RootAP, nextAp:GBrowserAP Activate m_browserDevice: 3 [ao_hdmi_out_select 0x00000002] AUDIO_RPC_ToSystem_HDMI_Setting_0_svc(319) prio_process = 0 sh: -: unknown operand In my system... 3527 SetCurrentBrowserTypeChoice GNewBrowserMenu.cpp 3 [GBrowserAP.cpp:621]:GiveUpFocus()- %%%%%% - !! currentAp:GBrowserAP, nextAp:GuideAP try_to_free_pages: free 632 +++ ALLOC index: 19456 order: 9 1. start remap DVR zone 86c00000(80601000) 512... map_done is 0... --- FREE index: 19456 order: 9 IN : /tmp/net Create /tmp/net Ok!!! In my system... In my system... [usb_param] setting for mars Setting for MARS-B [usb_param] set port two for host! [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit ehci_hcd ehci_hcd: EHCI Host Controller sata1: reset phy extra! sata phy reset ehci_hcd ehci_hcd: new USB bus registered, assigned bus number 1 ehci_hcd ehci_hcd: irq 2, io mem 0xb8013000 ehci_hcd ehci_hcd: park 0 ehci_hcd ehci_hcd: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub : individual port power switching hub : individual port over-current protection 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! [cfyeh] set PPE = 0 [usb_param] setting for mars Setting for MARS-B [usb_param] set port two for host! [usb1_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit [usb1_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb1_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb1_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb1_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit [usb2_param] usbphy reg 32, set sh = 0x5, get sh = 0x5, 4bit [usb2_param] usbphy reg 35, set src = 0x7, get src = 0x7, 3bit [usb2_param] usbphy reg 36, set senh = 0xd, get senh = 0xd, 4bit [usb2_param] usbphy reg 32, set sen = 0x8, get sen = 0x8, 4bit [usb2_param] usbphy reg 33, set dr = 0x0, get dr = 0x0, 3bit ohci_hcd ohci_hcd: OHCI Host Controller ohci_hcd ohci_hcd: new USB bus registered, assigned bus number 2 ohci_hcd ohci_hcd: irq 2, io mem 0xb8013400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub : no power switching (usb 1.0) hub : no over-current protection 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! usb 1-1: new high speed USB device using ehci_hcd and address 2 In my system... This is the current time: PowerUP_Done!!! hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected hub : ganged power switching hub : global over-current protection //////////getBonARPC: Audio Config 0x00000004 ! dingOption():21 [AO] RPC mute [AO] un-mute [AO] RPC un-mute ///////////[HDMI]: MARS HDM[I2C0] i2c speed changed to 50 KHz I is running... [HDMI]: Disable HDCP [HDMI]: Set I2C Speed = 50 kHz and increase i2c pull-low strength. [HDMI]: Hotplug Change !!! -1 -> 0 IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 Hotplug got one USB Hotplug of "Add" from port "1". [System2ApDaemon.cpp,threadSys2ApExe,156]msg type = 6 ,msg len = 5 ,msg = 31 20 55 50 00 00 00 00 0 usb block device found No Recording Partition Available !!!!!! No Timeshift Partition Available !!!!!! USB LIGHT OFF! CARD LIGHT OFF! IMSAP got usb update command ......command->type=-51 targetAP:IMSAP Key processed. 1 [HDMI]: RPC_HDMI_Setting, got HDMI Ready.......... [HDMI]: Setup HDMI AUDIO................... [RPC HDMI 0x0000004a] [EDID 0x00000000 0x00000000 0x01 s_freq=3 c_cnt0000002] [HDMI 0x00000001 0x00000001 0x00000003 0x00000001] [PRE 0x00000001 0x00000003 0x00000001 0x00000003] New_HDMI_frquency = 0x00000000, Old_HDMI_frequency = 0x00000000, RPC_HDMI_freq[=1 [HDMI]: Getao_hdmi_sync 0x0000idNameByTV => V0000] [HDMI]: s_freIDEO_PAL VIDEO_Iq= 0x00000003 CTS=74NTERLACED => PAL250 N= 0x00001800 (576i) [HDMI]: SET_HDMI_Frequency ST vid=0x2 HDMI_Freq=2 [HDMI]: call AUDIO_RPC_ToAgent_AOUT_HDMI_Set watchdog test pid 139, threshold: 50 [ao_hdmi_out_select 0x00000002] [HDMI]: SET_HDMI_Frequency SP vid=0x2 HDMI_Freq=2 hdmi_freq=74 sh: -: unknown operand watchdog test pid 139, threshold: 50 sata1: reset phy extra! sata phy reset watchdog test pid 139, threshold: 50 sh: -: unknown operand watchdog test pid 139, threshold: 50 sh: -: unknown operand watchdog test pid 139, threshold: 50 ir code: a8579f00 targetAP:GuideAP Key processed. 1 m_browserDevice: 1 m_browserType: 3 MediaLoaderThread stopped !!!!!!!!!!!!!!!!!!! CMD_TERMINATE received org change count = 0 , total change count = 3 sata1: reset phy extra! sata phy reset Open device(/dev/cdrom0) fai--- FREE index: 4096 order: 11 led WARNING: DVD unable to enter stand-by mode ______[DestoryTTSurface] AbstractAP.cpp 1436______ In my system... sh: /usr/local/etc/dvdplayer/script/stop_livepause: not found VIDEO_RPC_VideoDestroy Called!VBM: deleting GOB id=9 ... VBM: deleting GOB id=8 ... VBM: deleting GOB id=7 ... VBM: deleting GOB id=6 ... VBM: deleting GOB id=5 ... VBM: deleting GOB id=4 ... VBM: deleting GOB id=3 ... VBM: deleting GOB id=2 ... VBM: deleting GOB id=1 ... VBM: deleting GOB id=0 ... --- FREE index: 20480 order: 12 --- FREE index: 8192 order: 12 --- FREE index: 16768 order: 3 --- FREE index: 12288 order: 12 --- FREE index: 18432 order: 10 [DeleteGlobalAO] [Delete 0x00000003] 0xa620b430 delete ring [AUDIO WARNING] no more memory , do Remote Free --- FREE index: 17920 order: 9 _VENUSAOUT_Reset --- FREE index: 16896 order: 9 --- FREE index: 16640 order: 7 --- FREE index: 17408 order: 8 [A] gloabl free ptr 0x86200000 [A] gloabl free ptr 0x86100000 [A] gloabl free ptr 0x86400000 VIDEO_RPC_VideoHalt Called! In my system... save exit: isCheckpointed 1 Entering Suspend Mode .. Delete Network In my system... pppoe-stop: No PPPoE connection appears to be running watchdog test pid 139, threshold: 50 sh: -: unknown operand [DataObject.cpp 619] database compact ok!! save exit: isCheckpointed 1 Open device(/dev/ide/host1/bus0/target0/lun0/disc) failed In my system... MeleStandby.c:208 cmd [STANDBY_CMD_SYSTEM_OFF]:len=2 data= f5 fe MeleStandby.c:223 cmd sent ok watchdog test pid 139, threshold: 50 WatchDog does not receive signal for 2 seconds, value: 15 clear pli setting.... pli initializati***128MB version... on... Memory address 0x40000000 remount RO: ... chip id: 1283: Mars... 5280 wait5280 wai >>>>>> Got NAND Flash device! fw_desc_table_v1->signature=VERONA__ fw_desc_table_v1->version=0x1 fw_desc_table_v1->part_list_len=0xc0 data_buf = 0x10006858 fw_desc_table_v1 = 0x10006858 sizeof(fw_desc_table_v1_t) = 0x20 part_entry = 0x10006878 part_count= 0x4 fw_entry = 0x10006938 FW type, 0x2! Audio FW found! Video FW found! audio_fw_entry->offset = 0x1440000 audio_fw_entry->length = 0x1d3058 audio_fw_entry->target_addr = 0x81b00000 read len = 0x1d3058 video_fw_entry->offset = 0x1620000 video_fw_entry->length = 0x232670 video_fw_entry->target_addr = 0x81d80000 read len = 0x232670 [RPC]open for RPC ioctl... [RPC]start reset... [RPC]done... release address: 86000000 --- FREE index: 16384 order: 8 termination code: 99 Checking irrp... sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata1: phy reset timeout! sata1: no device found (phy stat 00000000) sata1: ata_bus_probe failed scsi1 : SATA_DRV sata dma reset sata modules is not ready yet!!! sata modules is not ready yet!!! sata2: reset phy again! sata phy reset sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata2: reset phy again! sata phy reset sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata modules is not ready yet!!! sata2: phy reset timeout! sata2: no device found (phy stat 00000000) sata2: ata_bus_probe failed sata module is ready for service. 1 show_offline_dev_field(1310)dev_addr=c0062500; sata1 :device0 not found sata2 :device1 not found mars_sata_work_fn device removed from sata port0 mars_sata_work_fn(1141): no cmd Q mars_sata_work_fn(1172) hot plug end device removed from sata port1 mars_sata_work_fn(1141): no cmd Q mars_sata_work_fn(1172) hot plug end sata device have removed. rmmod: can't unload 'r8192s_usb': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_rsi': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_crypt_ccmp_rsi': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_crypt_tkip_rsi': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_crypt_wep_rsi': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_crypt_rsi': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_crypt': unknown symbol in module, or unknown parameter rmmod: can't unload 'ieee80211_rtl': unknown symbol in module, or unknown parameter rmmod: can't unload 'r8187': unknown symbol in module, or unknown parameter ohci_hcd ohci_hcd: remove, state 1 usb usb2: USB disconnect, address 1 ohci_hcd ohci_hcd: USB bus 2 deregistered ehci_hcd ehci_hcd: remove, state 1 usb usb1: USB disconnect, address 1 usb 1-1: USB disconnect, address 2 Hotplug got one USB Hotplug of "Remove" from port "1". ehci_hcd ehci_hcd: USB bus 1 deregistered enter power saving mode... Stopping tasks: ==========rpc-1 got signal... =rpc-3 got signal... ======rpc-1 got signal... =rpc-3 got signal... ========| Freeing memory... try_to_free_pages: free 1017 try_to_free_pages: free 777 try_to_free_pages: free 123 try_to_free_pages: free 0 done (1917 pages freed) generic_sata_suspend sata1 :no device found on port0 sata2 :no device found on port1 generic_sata_suspend(307)suspend finish cp_close free rings cp->rxdesc_buf =0xa19ad000 RTC time: 0 0 0 4 8 Alarm time: 10 6b 2 2e 12V5V_GPIO setting=1000002c options=0 hwinfo=2 powerkey_irrp=a8579f00 ejectkey_irrp=e817fc03 powerkey_gpio=78 ejectkey_gpio=-1 vfd_type=0 a0..........15tbYou have accessed an invalid hardware address 0X1801B00C ?hello world! 5280 5wa2i80t waiA[HDMI]: Set I2C Speed = 100 kHz [HDMI]: Chk_HotPlug() TV is not connected. [HDMI]: Read_EDID abort, HDMI cable plug off. [HDMI]: TV is not connected. PAL logo REALTEK ROM Monitor, Revision 0000.0202.1026L. Copyright (c) Realtek Semiconductor Corp. - All Rights Reserved. For a list of available commands, type 'help'. Compilation time /version= Jun 23 2010 20:34:19 /0000.0202.1026L MAC address = 00.ce.39.60.17.9a Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0x93 / 0x78 Endianness = Little Flash memory size = 128 MByte SDRAM size = 128 MByte First free SDRAM address = 0x800fa700 Press 'ESC' to Monitor mode Realtek> help Available commands : . . (repeat last command line) ; ; (command separator) + + ; compare compare continue continue copy copy [-f] disk disk [-f] (id [hda|hdb|hdc|hdd] ) | (read hda|hdb|hdc|hdd ) | (write hda|hdb|hdc|hdd ) dump dump [-m][-8|-16|-32]
[] erase erase -e|-m|
fill fill [-8|-16|-32]
fread fread tftp:///
fwrite fwrite tftp:///
go go [?|.|
[]] help help [] info info [boot|board|cpu|sysctrl|memory|uart|all|pll] load load [-r] ([tftp:][//][/]) | Press any key (Ctrl-C to break, Enter to singlestep)  ([asc:] [//(tty0|tty1)]) ping ping ipaddr [] port port [-a] [-8|-16|-32]
[] reset reset saveenv saveenv setenv setenv [ []] stty stty [-tty<0|1>] [-b|-u|[-p][][n|o|e][7|8][1|2][hw|none]] test test [-l] | [-m] [ [ ] ] unsetenv unsetenv | (-u|-s) Realtek> reset